Palm Pilot HELP

[Oasis-3]

I won a Palm Pilot VIIx at the Masion-Dixon TDR show and got the QuickCheck II adapter for it.



1- I can not get the QCDodgeManual.pdf file to open on my computer so I don't have a Manual at this time.



2- I have the plug set up with the Black wire on top left the White wire on top right and the Silver wire on the bottom.



3- The Blue wire with the clip on it were should it go?



4- At idle my Boost is 14. 6 psi. and I get no Output Torque reading



Thanks for any help

Cliff

 

[Bigsaint]

Cliff, go to the link below and download the Acrobat reader, you need it for pdf. files. That will get you into the manual. Best I could do as I don't have the software but do have a Palm Pilot.



http://www.adobe.com/products/acrobat/readstep.html



Scott W.

 

[Oasis-3]

Got It

Thanks Scott that got the manual for me now I have directions

Thanks Again

Cliff

 

[ftb87]

Please give us an update. I might want to purchase one.





Frank

 

[work2muchplay2little]

Don't know if you'll see this on yours, but I had to switch the A and C wires to get it to work. Kept getting the "Datalink Down" message until I switched them.

 

[KennyM]

Cliff, I need to know how well it works. If all is well I will buy the Quickcheck for mine. That will give us two in the Mason Dixon TDR. I have not even taken mine out of the box yet. Ken

P. S. love those smoke stacks.