Engine/Transmission (1994 - 1998) party poopers

[b.ferrara]

OK nobody interested in kdp party, how bout just answering

2 or 3 ??? for me then:

1) is the jig for 1st gen and 2nd gen the same, as long as 12v?



2) who can tell me what turbo is in a 97' hx35, hcm1, etc...



3) are the pump settings the same as 1st gen when tweaking them?



thanks Bill

 

[Got Smoke?]

I can answer question #2.



HX35-12cm WG'd

 

[formula]

Originally posted by b. ferrara

OK nobody interested in kdp party, how bout just answering

2 or 3 ??? for me then:

1) is the jig for 1st gen and 2nd gen the same, as long as 12v?



2) who can tell me what turbo is in a 97' hx35, hcm1, etc...



3) are the pump settings the same as 1st gen when tweaking them?



thanks Bill

1) Read this thread: https://www.turbodieselregister.com...d=62802&perpage=15&highlight=jig&pagenumber=2



2) HX35 12cm wastegated



3) NO, NO, the injector pumps are completely different.



Sean

 

[b.ferrara]

2nd gen trucks vs 1st gen

Sean thank you, I have to start all over again. Making my book of

knowledge about the truck.



Mark I love the eaton shifter, my idea all the way, hook up the jake brake switch to the splitter. Where's the pictures of the 5" stacks. I'm not sure of 4 or 5" I guess I'll have to see a couple to make up my mind. Thanks for the info. I guess the hx35 I have in the garage is now for sale.



Bill

 

[Forrest]

On #3, sounds like you've got the 215hp pump. The rack stop plate position is real sensitive in that pump ... consider yourself lucky. The difference between the stock position, centered, and all the way forward is 40 to 60hp ... over 100 ft-lbs ... what a freebie.

 

[b.ferrara]

pump adjustment

Forrest thanks for the response. Now for the big ??



do I have to do anything else in order to make that adjustment

or can I just make it and be ok.

thanks Bill

 

[Forrest]

I'd remove & plug the hose to the wastegate @ the same time, so that you can boost up to match the add'l fuel. Watch the EGT guage & hold on.

 

[midwestdually]

i told ya billy boy... . and when you get those stacks turn that fuel screw WAY up!!i would still put in that turbo you got in the garage... it is PDRed correct??just swap them out but only after you get those guages... then you can tell the difference and report back to us... .

 

[Got Smoke?]

Re: 2nd gen trucks vs 1st gen

Originally posted by b. ferrara

Sean thank you, I have to start all over again. Making my book of

knowledge about the truck.



Mark I love the eaton shifter, my idea all the way, hook up the jake brake switch to the splitter. Where's the pictures of the 5" stacks. I'm not sure of 4 or 5" I guess I'll have to see a couple to make up my mind. Thanks for the info. I guess the hx35 I have in the garage is now for sale.



Bill

Eaton shifter came back off till I can come across another gear shift to shorten.



only stack picture I have right now is in my Misc. pics as my truck pics album is full.



let me make mention that MY TRUCK IS WHITE! The green 2500 is my buddy Aaron from Ohio. He wanted me to bring him some new longer stacks to get up over his trailers for towing. He wanted 48's I brought him 56's (so he could cut to his desireed length!) :-laf