PE Comp "defueling" ?

[CCahill]

OK..... After 3 e-mails and 1 phone call to Edge Products with no response..... I thought I'd try the forum... what with all the collective knowledge...



I know the EZ stops fueling past . . ohhh 2300 RPM +-.

My ? is this . . does the Comp box do the same thing... I'm upgrading from the EZ, and am looking at the Comp, and maybe others, but would like to find something that continues fueling 'till redline, or some predetermined, or adjustable RPM..... Do any of the Major fueling box's fit this sceniaro ?



Curiouser and curiouser... ... ... ...



Colin



THIS..... is major fueling... not quite what I'm looking for... .....

 

[Steve St.Laurent]

You can get a custom TST PM3 that fuels to whatever RPM you wish - I don't know what the PE Comp box defuels at. My box fully fuels (50% on level 9) to 3200 rpm and then bleeds off to stock at 3400 rpm which is the governed speed of the ECM. They could fuel it even higher if you wished, but you would run into the limit of the solenoid duty cycle. That is programmable as well - in my case I had them program my box for a 70% max solenoid duty cycle (max recommended is 65% which is what they have their comp box programmed at, 55% is the max on their street box - so I'm taking a chance of melting my fuel solenoid). With a 70% duty cycle and the street fueling programming on the top end of 50% over stock you will hit 70% duty cycle at 2700 rpm, 65% is around 2500 rpm - once you hit the solenoid duty cycle it will level off the fueling. They can also program more fuel down low - my box fuels 100% over stock at the bottom end :biggrin: !

 

[KatDiesel]

Just curious, did you leave your phone number with your emails? How long ago you send the emails? They could be taking the holiday weekend off..... ?? I know a while back they stopped answering emails due to a virus on their PC, didn't wanna spread it around.

 

[CCahill]

Just bringin' it to the top again... havn't found the answer yet...



Colin