POD's Installed....

[HRDROKN]

Well, I got motivated today and decided to put my injectors in. It took me all about an hour. I went with the thin (. 023) washers and have just a slight haze at idle. They don't smoke all that bad (my opinion) at current pump setting, but I was surprised to see another 10 psi of boost! Oo.



Oh... . almost forgot tell ya all about my test drive... . I got on it around a corner and pitched the truck sideways... :-laf :-laf :-laf

 

[Jdonoghue]

Thin washers, good choice. I think they give the least amount of idle 'haze'.

Test drive: reminds me of the '92 I used to have. I took it easy after I changed the head gasket. A week later, I decided to see what the 'go pedal' would do on the way to work one morning - sideways truck!

 

[TomThomas]

"what injectors did you go with?" Duh, POD (Prince of Darkness's from EIS) What'd you pay for 'em. (I hope this isn't another stoopid ??)

 

[HRDROKN]

Oh heck... . don't remember how much now? $430 or $440 from Piers...



I really like the performance improvement with these injectors, of course that being said, I'm only comparing them to stock and the mods I've done to this point.



It seems that these had made a bigger difference than my injectors in my 24 valver.



We went up to the foothills yesterday to a Rodeo in Penn Valley, CA and the truck pulled the grades real nice and the turbo was just a singing!!! Ahhhh... . such beautiful music! :-laf :-laf



.

 

[EarlKann]

Oh heck... . don't remember how much now? $430 or $440 from Piers...



I really like the performance improvement with these injectors, of course that being said, I'm only comparing them to stock and the mods I've done to this point.



It seems that these had made a bigger difference than my injectors in my 24 valver.



We went up to the foothills yesterday to a Rodeo in Penn Valley, CA and the truck pulled the grades real nice and the turbo was just a singing!!! Ahhhh... . such beautiful music! :-laf :-laf



.

:sigh: I hate it when you post fun stuf.

 

[bgilbert]

in my 24 valver.

Hmm don't see any other trucks in your sig :-laf . Something about that macho rig you got there, makes any new truck not worthy for your sig eh ?

 

[HRDROKN]

Hmm don't see any other trucks in your sig :-laf . Something about that macho rig you got there, makes any new truck not worthy for your sig eh ?

Ya, had an 01' 24 valver that I sold a couple years ago. It was a great truck... drove it like I stole it 24/7. A lift pump was the only problem I ever had with it.



That being said... I much prefer an old 12 valver any day! Too much fun! Oo.



.

 

[Rebel Ram]

What year engine do you have. Ive read that the earlier the engine the better the improvement. I have a 92 auto and a 93 stick and want to get some PODs but dont know which to put them in.

 

[HRDROKN]

What year engine do you have. Ive read that the earlier the engine the better the improvement. I have a 92 auto and a 93 stick and want to get some PODs but dont know which to put them in.

I have a 1992 motor/drivetrain, H1C & 16cm exhaust housing w/ just a bit of tweaking (voodoo) on the pump. :-laf Waiting to put my gov spring in before going further... .

 

[Rebel Ram]

Well then I am encouraged by your original post. Based on what you have done and what you have so far to get such an increase in performance. My 92 is a little farther along than the 93. But its an auto. I'd like to buy a set and swap things around to see what happens. Are you bringing that truck to Redding? If so Id like to check it out.

 

[HRDROKN]

Yes, we will be there! Oo.