Archived power distribution box

[Devan Manis]

My Dad opened up the power distribution box, to look for any loose wires, because we have a problem with our signal lights, and A/C compressor clutch circuit keeps blowing the fuse. Now the problem, after he took that apart the truck won't start, no wait to start light, no lift pump. I don't think the ecm is getting power, but how would he have caused this? and how can we go about checking where the ecm gets power from to the ecm and find the problem? we need this truck up and running asap. Thanks.

 

[bmoeller]

What year is the truck?

 

[Devan Manis]

ohh yeah, sorry. its an 01 3500.

 

[Devan Manis]

we checked the 30amp ecm fuse, the 20 amp ecm fuse, the 50 amp bat fuse, all were good.

 

[Bob Wagner]

I would check the main 100 ampo fuse



its actually 140 main under the hood by the big wires

 

[Devan Manis]

bob, its good. it will do almost everything, but no lift pump and now wait to start light, it will even crank, but no fire. thanks so far guys.