Attention: TDR Forum Junkies You guys arte a wealth of info. I am trying to diagnose a lack of power problem. I've changed the fuel filter and am in the process of cleaming the prefilter. I purchased the kit from Cummins west with heater gasket. This almost broke the bank..... $10.
When I removed the filter bowl it had some grainy stuff in it but that was it. What I did notice was that the heater wiggled. Is the allen bolt supposed to hold it up tight or is that the job of the filter bowl?
When I removed the filter bowl it had some grainy stuff in it but that was it. What I did notice was that the heater wiggled. Is the allen bolt supposed to hold it up tight or is that the job of the filter bowl?
