Prodigy Quit Working

[BigMike]

I was on the last leg of a two week road trip pulling my fiver and I noticed that my Prodigy Brake Controller indicates it is n. c. ,(Not Connected). It has been working fine for several years. Checked my connections. They seem ok. Lites on the tow are working fine. I've got two connections, one in the bed of my PU and one on the rear bumper. Got the same results with both connections. Any help in diagnosing this problem would be appreciated.

 

[MGreer]

I had that happen to mine also. Ended up being the prongs on the camper plug weren't making a good connection. I took a small screw driver and pryed the prongs out a little. Hope this helps.





Mike

 

[clem]

Do the easy thing take your controller to a dealer that sells Prodigy. They can check your controller out and GIVE you a new one FREE if it is bad. Then you can go on from there. Mine went on me everything looked good but had no brakes. Cost me a new hood and other things in front. Good luck