Attention: TDR Forum Junkies Hi, i was replaceing my serpintene belt the other day when i noticed my breather bottle (puke bottle) was just barley hanging there . I have had this truck for a couple of months now and im learning new things every day . Anyway the looked like it was rigged up with a tye wrap with a hole in it around the bottle and sliped over the stud with no nut 
and the hose was loose were it went in to the bottle so i figured i would go to the dealer and order the right parts to get properly mounted. After ordering the parts i went to go pick them up only to find out that tye wrap was the factor strap 
i ended up with a nut and two tye wraps for over $12. 00. So i decided to do what alot of poeple do here and get rid of the bottle and splice some 3/4 heater hose down below the swaybar i used the tye wrap and nut to hold the hose close to the engine . Now i see why everybody gets rid of those things no more oily mess to deal with 
thanks to all the good info here.
and the hose was loose were it went in to the bottle so i figured i would go to the dealer and order the right parts to get properly mounted. After ordering the parts i went to go pick them up only to find out that tye wrap was the factor strap i ended up with a nut and two tye wraps for over $12. 00. So i decided to do what alot of poeple do here and get rid of the bottle and splice some 3/4 heater hose down below the swaybar i used the tye wrap and nut to hold the hose close to the engine . Now i see why everybody gets rid of those things no more oily mess to deal with thanks to all the good info here.
