Quadzilla Boost fooler with Smarty

[JCasper]

Any one out here using a Quadzilla boost fooler along with your Smarty? If so how is it working for you?



I know running wild SW it disables the WG. The boost fooler I think just allows 40psi or so out of the stock charger.



I normally run Moderate TM level 5 or 7.

 

[sid325]

I'm running both and no problems. I have my wastegate set at 45psi, w/o the Quad I could barely hit 40psi. With the Quad 45psi is not hard. I'm running the mild sw on level 9.



Sid

 

[JCasper]

I'm running both and no problems. I have my wastegate set at 45psi, w/o the Quad I could barely hit 40psi. With the Quad 45psi is not hard. I'm running the mild sw on level 9.



Sid

What do you mean you have your WG set to 45? It's electric, I didn't think you could adjust it.

 

[sid325]

I'm running a HTT 62/13ss. It has a mechanical wastegate. Without the Quad I would throw a over-boost code when I hit around 40. With the Quad I no longer throw over-boost codes and I set my mech. WG at 45psi.



Sid

 

[JCasper]

Gotcha, thanks.



I am hoping to put on a HTT 62/14 this year.