Engine/Transmission (1998.5 - 2002) Question On Ats Manifold

[DArmfield]

Hello, I have a question about my ats manifold. I bought a

12 valve manifold for my 97 12v and before it arived I changed to a 24v engine. When installing the manifold there was minimal differince with the ports on the sides. Does any one think this could lead to problems,

thanks, darmfield

 

[hdm48]

Now that is a good question. I do a lot of porting work on exhaust manifolds and turbo's and have never tried to make a 12v work on a 24v. What you could do is mark a used gasket on the manifold and see how much material needs to be removed to match it up. As lond as it doesn't make it too thin on the walls it may work. I wouldn't try to run it if you don't at least try because of back pressure issues. Then any gains you were trying for would be negated.

If I had one lying around I would check it for you but I don't right now.

Curious to see how it works.



Dave