Here I am

Rear Brake Shoe Size?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Coolant change in 93 Cummins

Dtt Torque Convertor

Status
Not open for further replies.
If you are happy with the current braking, and see no need for additional power, then stick with what you got. However, if you are like the 99. 99% of the rest of us who would always like more whoa power, then go for the 12x3 and 1 to 1-1/8" wheel cylinders. Some say the 1 inch wheel cylinders actually give more bite and stopping power.



Stock was normally 12x2-1/2 for the 3/4tons.



Daniel
 
D350 pickup SRW is (was!) 2 1/2. If you go to 3", either turn the drums or replace. I did that on my truck when my cousin owned it 10 years ago!:)
 
Status
Not open for further replies.
Back
Top