rear brakes and seal

[Archive]

thanks for the help on the front universals all went well know i am going to do the back brakes and rear passenger side seal this seal was replaced once under warranty it seems to go about 30000 miles then it starts to leak ive checked the vent and it is not blocked does any one have any suggestions is there a better seal i could use ? is there any thing to look out for when doing the back brakes any help would be greatly appreciated

 

[Archive]

Dc has come out with a new improved seal,it's the same part # with a AA on the end,suposed to last longer.

 

[Archive]

I put a 45 degree street ell in my fill hole on my Dana80. I got another qt. of oil in. It runs cooler than ever in spite of the warnings I got, and the seals haven't leaked again! I was told that too high of oil level will cause foaming and overheating. I already knew that but it has to be high enough for the seals to get some oil. Craig

------------------
97 3/4Ton, 2WD, 5SP, #11 Plate, 14 Housing, AF942M Air filter, Gutted Cat, 4"From Turbo, Airlift, Shortened Frame, Custom Bed, HEY FORDBOY POWERSTROKE THIS!