Attention: TDR Forum Junkies 
Attached are pictures of my hardware install. Basically welded on 1/2 of an axle U-Bolt. This allowed for adjustment of the e-cable at the mounting bracket on the U-bolt, thereby taking slack out of caliper spring.
link to the post with the pics
https://www.turbodieselregister.com/forums/showthread.php?t=108136
btw for all of u who have done this mod how happpy are u with the ebrake performance? From a standstill with ebrake engaged, shifting to drive the truck doesnt budge. However if Im in drive and idleing down the road the e-brake offers minimal stopping power. Any ideas?
tjm
link to the post with the pics
https://www.turbodieselregister.com/forums/showthread.php?t=108136
btw for all of u who have done this mod how happpy are u with the ebrake performance? From a standstill with ebrake engaged, shifting to drive the truck doesnt budge. However if Im in drive and idleing down the road the e-brake offers minimal stopping power. Any ideas?
tjm
