Attention: TDR Forum Junkies 
Trying to determine the condition of the rear srings in my 93, was wondering if someone would measure either how much arch their good stock springs have (wood/straight edge across spring eyes, measure down to the top of the spring at axle), or the bumpstop to the bump stop bracket distance. Would also be ok if someone who knew how much lift they had took the measurements too.
I installed the 2" softride front springs, figuring it would level the truck, now the truck looks like it is sitting tail down (sometimes looks level in the right parking spot). Not sure if the rear springs are sagging after 17 years, or if the front raised up too much... .
Thanks for the help guys, I am getting tired of the tail down prerunner look any time I load the bed up.
I installed the 2" softride front springs, figuring it would level the truck, now the truck looks like it is sitting tail down (sometimes looks level in the right parking spot). Not sure if the rear springs are sagging after 17 years, or if the front raised up too much... .
Thanks for the help guys, I am getting tired of the tail down prerunner look any time I load the bed up.
