REC radio connections

[RVTRKN]

Does anybody have the wiring schematic for the two plugs to the REC radio (NAV unit for 2006 thru 2008) for the Dodge Ram with Infinity sound upgrade? The plugs that I'm referring to, plug in side by side, one is a 10 pin plug and next to it is a 22 pin plug. I know most of the 22 pin plug wiring, but the 10 pin plug is a total mystery. The kit I have completly ignores the 10 Pin plug, as if it doesn't exsist. My REC radio is NAV, U-CONNECT and SAT capable.

Thanks in advace
Steve

 

[RVTRKN]

Taking this thread back to the top, I'm hoping to use the 10 PIN plug for other than speaker connections. The 22 PIN plug has the Data Buss, speaker outputs and Batt +/-. But the 10 pin plug has VES in and out that my research has revealed. Pin #'s 4-VES in R / 8-VES in L / 7-VES in GRD ,these have been confirmed. The only matching 10 PIN plug that I can find that seems to go with my Ram is for SDAR inputs and VES inputs and outputs. Question is what is SDAR? VES should abreviate for Vehicle Entertainment System, but what is SDAR.

 

[RVTRKN]

Does anyone have the diagram? And one more thing, I need the wires that the mic uses from the rear view mirror.

 

[sag2]

This should be what you need.

 

[sag2]

You might also need this.

 

[RVTRKN]

Thanks sag2, that's exactly what I needed, however for the microphone there are two positive inputs, Mic 1 & Mic 2, with one negative from the rear view mirror. Are there two microphones built into the truck sharing one negative wire?

 

[sag2]

Sorry, don't know if there are two.

 

[RVTRKN]

Thanks for the info sag2, your info is very helpfull.