Engine/Transmission (1998.5 - 2002) Relocate fuel return line, adding Walbro LP.

[ARoss]

I recently read a thread that addressed an old topic about relocating the fuel return line ... I believe there were benefits from doing this. Does anyone have a link to the thread?



I'm replacing my IP and adding a Walbro lift pump to my '99 and would like to relocate the return line at the same time.



I also need some technical help with the relay. Does someone have instructions/pics of an aftermarket lift pump relay install? Where to mount the relay, etc?



Any help would be greatly appreciated!

 

[Lightman]

I recently read a thread that addressed an old topic about relocating the fuel return line ... I believe there were benefits from doing this. Does anyone have a link to the thread?



I'm replacing my IP and adding a Walbro lift pump to my '99 and would like to relocate the return line at the same time.



I also need some technical help with the relay. Does someone have instructions/pics of an aftermarket lift pump relay install? Where to mount the relay, etc?



Any help would be greatly appreciated!

Try This http://www.cumminsforum.com/forum/showthread.php?t=1558 You my have to regester as a user

 

[ARoss]

Thanks, I've been following those threads, but they don't contain the info I'm looking for. The thread I'm talking about was on TDR and addressed the return line relocating to the fuel tank vent tube ... does anyone recall?