removing dash instrument benzel

[Archive]

I've finally gotten around to installing factory fog lights on RedRam. They are in the bumper and all is well... well, until I came to #27 in the instructions "Remove cluster bezel from the I/P... " Is there a trick to this? I am alittle apprehensive taking a screwdriver and trying to pry the surround off. I've done this in the past with other vehicles and found hidden screws etc too late. Help... .

------------------

 

[Archive]

You can just pull it off with your fingers. No need to scar it up with a tool. It just clips on. Maybe the late models have some sort of complication, but I haven't read about one.

------------------
Joe George
Eureka, CA

'95 2500 CC auto 4X4,3. 54,Combo EGT/boost guage,custom switch panel,PacBrake,TST #5,BD valve body,Automatic motorhome steps on both sides,Foldacover hard bed cover,Cummins chrome kit,Black steel grill guard,Front hitch receiver

 

[Archive]

Just grab ahold and pull. Pops right out.

 

[Archive]

I asked this question about a month ago, one of the other members was kind enough to reply, suggesting the use of a 1 1/4" putty knife between bezel & dash. Just slide in the knife, pry gently and the bezel will pop right off. Piece of cake. #ad


------------------
2001. 5 ETH/DEE 2500 4X4 Q. C. SLT Lund Visor Owens Runningboards C R Laurence Power Slider & Others BUT NO POWERTRAIN BOMBING!!!
"The Redneck Toy Box"