Request for 4x4 alignment specs

[CSilkowski]

Hi,



I just replaced my E-rated BFGs with Toyo M/Ts to eliminate death wobble. Although D/W is gone my truck can't stay in its lane. I suspect it is from the alignment the shop that replaced the tires performed as it was fine before (except for D/W). Someone mentioned that the alignment specs for our trucks was published in a TDR publication ~1 year ago but I can't seem to find it. Does anyone have a copy they can post?



Thanks,

Chris

 

[cerberusiam]

Get the caster out to 3. 5 to 4 degrees. On the cams that is the bulk of the cam forward. Camber should be as close to 0 as possible, toe in at 1/16 of an inch. Make sure they didn't set set the caster adustments different on both sides.

 

[NIsaacs]

I see in your sig. that you have spent a lot of money on your front end, yet only have 135k miles on the truck. Are you running aftermarket wheels and over sized tires?



Nick

 

[CSilkowski]

Cerberusiam - Thanks! This is very helpful. I'm going to take it back this afternoon to where I had the tires installed and alignment for adjustment.



Nick - I'm running stock aluminum alloy wheels with 295/70/17 Toyos.