Rig style exhaust

[Archive]

I always wanted to add volocity stacks to my cummins, and I was wondering if anyone knows where on the net I could find a set?

------------------
96,2WD 3/4t ext. cab-DC,tst performance kit,full pillar guages,5th wheel setup
wanting to add 2-3 lift, transmission kit, and rig style volosity stacks.

 

[Archive]

Go to www.oefilter.com for heavy truck filters and exhaust systems. NAPA also sells parts to make a big rig style stack exhaust. You need to get a NAPA Master Car & Truck Exhaust System catalog. I plan to put one on my truck soon, hopefully by the end of summer.

------------------
1996 Ram Clubcab 3500 SLT, auto, 4. 10 limited-slip, TST #5, K&N, Dunrite converter, Trans-Go shift kit, Straight pipe, DiPricol EGT, boost & trans temp. gauges, aluminum flatbed and custom front bumper.

[This message has been edited by Koa Man (edited 06-11-2000). ]

 

[Archive]

azgearpro,

stacks are great. picked mine up at a regular big truck parts place. used a Jardine 4" downpipe and straight pipe under the cab, then 4" flexpipe to an elbow up through the bed, hooked to a 4" square tube (easier to weld fittings to), with a pair of 5" X 4' stacks turned out at an angle. have some pics in readers rigs. click on the one without a picture showing it is the best. good luck and hope ya like yours as much as I do.


Todd

------------------
99' 3500 SLT Med. Red Metallic 163" W. B. Cab & Chassis with custom haulin' bed, sleeper, rear light bar, stainless runnin' boards, stainless cow catcher on front, 4" turbo back staight to 5" dual stacks behind sleeper, hadley "bully" air horns, galaxy 44 c. B. with texas star 350 and wilson 5000 whip, enough lights to see who's on either side of me any time of night, etc... ...

 

[Archive]

Stacks are the way. But like cuminspwr said, the local big rig place should have them and I used all mandrel bends for the freeflow exhaust. I takes some mapping, but it is worth it. I have pics on www.gltdr.org members rigs and will be updating them with new ones. The stacks in that picture are 3" and I now have 4".

------------------
'98 ext cab 4x4. Skyjacker 4. 5" lift w/ 36" swampers. 370 injectors, pump done right, Scotty air, HX40 18. 5 housing, JRE stage III fuel plate, McLeod dual disc street clutch-"Mitchellized", ISSPRO gauges, 4" black smoke puffin'-hear me CUMMIN chrome stacks. A member of the best brotherhood around-TDR.
**Skyjacker raised**
**Cummins praised**

 

[Archive]

Thanks for all your help guys. The information really helped me, because now I can find what I need to complete the project.

------------------
96,2WD 3/4t ext. cab-DC,tst performance kit,full pillar guages,5th wheel setup
wanting to add 2-3 lift, transmission kit, and rig style volosity stacks.

 

[Archive]

There is also a picture of Stack'd-n-Jack'd's stacks (say that 5 times real fast) truck on this thread: https://www.turbodieselregister.com/ubb//Forum10/HTML/000118.html