??'s for guys runnin A5K/K31

[drasko]

im thinkin about gettin a stock K31 or 2, one for my 3rd gen and another for my 94, and was wondering what all you had to hook up on the CR trucks with the electronics. did ats even use any othe the electronic stuff on out trucks? im not concerned about the hookup on the 94 since everything is nice and simple, MECHANICAL!!!!!!

what would it take to bolt a stock K31 up on our trucks? i have a boost fooler and al that jazz, just need the lowdown on the minute stuff... . thanx in advance.

Drasko

 

[d90boy]

You'll either need to retain the stock electronic wastegate and tie it up to the side or get a resistor to plug into the factory wastegate controller harness. The resistor looks better but it seems in practice the stock part may work better. I have had no problems with the resistor from high tech.