service required message

[rfitzgarrald]

Does anyone know the procedures for clearing the service required warning on the overhead display?

 

[DonFitzwater]

If it's on because of the 60kish egr cooler service, you need to perform that service then reset the reminder.*

 

[lpennock]

The "Perform Service" message will display on the EVIC each time you turn the ignition switch to the ON/RUN
position to indicate a emission maintenance is required. To reset the "Perform Service" indicator system (after per-
forming the scheduled maintenance) refer to the following procedure:

• 1. Turn the ignition switch to the ON position (Do not start engine).
• 2. Press and release the brake pedal two times.
• 3. Fully depress the accelerator pedal slowly two times within 10 seconds.
• 4. Turn the ignition switch to the OFF/LOCK position.
NOTE: If the indicator message illumination when you start the vehicle, the "P

 

[rfitzgarrald]

Thanks Ipennock. Will give it a try.