set off four codes

[CMast]

I was installing my quad box and set off these codes I unhooked my batteries will this clear the codes if not is there something I can do or will I have to remove everything and take it to a dealer I have an 05

2269

0652

2127

0069

 

[TCDiesel]

Those are all related, clear codes reinstall Quad and check operation, DTC"S return call Tech support.

 

[JVolpe]

Disconnecting the battery cables does not clear any codes or reset the ECM. It sounds possibly like you did not make sure all the connections are connected all the way, or possibly a bad wiring harness. If you take it off and go thru enough start/run sequences the codes should clear. They can be cleared by an OBDII scanner, Autozone will normally do this for free.

 

[Tomeygun]

I was installing my quad box and set off these codes I unhooked my batteries will this clear the codes if not is there something I can do or will I have to remove everything and take it to a dealer I have an 05

2269

0652

2127

0069

Make sure you have the plugs pointing the right way (not 180*'s off)



I have had many a customers call me with a no start condition due to one sensors plug being pluged in backwards

 

[CMast]

Tomeygun thats what i found i plugged the blue one in backwards after i fixed that i took it to auto zone and they cleared the codes, thanks for the help