Silly Question

[banzaitoyota]

I aquired a set of 4 8 lug dually rims, these are a nice patterned alloy. My question is will/can I use them on my 92 D250 2WD????

 

[Greenleaf]

Rims?

I have wondered that myself. My stainless wheel covers are for the front of a dually. Looks the same as if it were. There may be a clearance problem with the dually rim off-set though



Greenleaf

 

[Philip]

My question is will/can I use them on my 92 D250 2WD????

No they will not work on a single tire truck. The off set is to much for the narrow axles that the single tire truck uses. Both axles are to narrow. On the fronts most likely the tire will hit the frame on a turn. On the rear the tire will most likely hit the bed side if you put the offset outward. If you put the offset inward the tire will hit the inner part of the bed before the lug nust tighten down. You would need at least 3/4" of spacer to clear the inner part of the bed.



If you decide to part with them. Be sure to post in here when you place an add for them. Many first gen people are wanting alumn rims. Chevy (alumn)dually bolt pattern rims will work on the Dodge. You just need to relieve the back side of the rear rims for the coins that Dodge rims use.

 

[banzaitoyota]

They will go up for sale tonight. I'll post them on EBAY has I have NO CLUE to their value.

 

[banzaitoyota]

listed: GOOD LUCK!!!



http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2438163502