Competition SLEDPULLER II has begun......

[Sled Puller]

Its a start, I don't expect it to make the beginning of the season, or maybe not this year at all.



If the original Sled Puller does not get sold, it may be longer than that.

 

[DieselTweaker]

ahhhhhhh NICE Gene



well good luck hope to seeya back out there soon!

 

[csutton7]

you lucky dog--have fun... . chris

 

[Got Smoke?]

Drop Box! Just what the heck are you up to Sleddy?



Has the high bidder still not showed up with the $$$?

 

[Mhannink]

is there even a transmission in there or its it s a clutch hooked to the driveline i can't really tell from the pic

 

[Got Smoke?]

is there even a transmission in there or its it s a clutch hooked to the driveline i can't really tell from the pic

That's a Dropbox & Reverser setup. Only one forward gear and one reverse gear. However you can change out the gear for higher or lower. Its MUCH stronger than your average trans/X-fer case setup though. Its what the open class guys run. The black round object is the bellhousing, its usually setup for 3 or 4 disk clutches.



What's a-matter Gene tired of breaking stuff? Your SBC DD & transmission held up fine last year, but I remember a axle going in C-town KY last Sept.

 

[Mhannink]

kool thanks for clearing that up

 

[bgilbert]

Nice 'Comp'-like pic, only showing a little, with things covered up:-laf:-laf. .

 

[DRadzierez]

Yea OK gene your done pulling!!!!!!!!!!!!!!!!

 

[Sled Puller]

What's a-matter Gene tired of breaking stuff? Your SBC DD & transmission held up fine last year, but I remember a axle going in C-town KY last Sept.

The parts I used last year are fine at the 600-800HP range.

Doesn't EVERYONE break an axle at Cynthiana? I needed to bump up to Haisley axles, that could have been a win. Oh well.



I decided there was noway I was going cut a truck up as nice as mine for big parts. I have been gathering this stuff up for a few years, buying it right when I could.



I didn't say I would be driving it, now did I, Dave? Of course, I didn't say I won't be driving it, neither. And, this year will be a long shot, anyway, I just couldn't keep it asecret, any longer!!



Oh, sorry about that tarp, I forgot to take it off. Maybe next time. :-laf

 

[Bob Wagner]

I thought sledpuller I sold on ebay

 

[Cooker]

I thought sledpuller I sold on ebay

It sounds like the buyer has yet to come though with the $$$$

 

[B KIRK]

What's up?



http://www.prodieselsledpulling.com/dsm_006.htm



Brad

 

[csutton7]

sleddy I can probably get you a deal on some ladder racks and camper shell if you want ... ..... chris

 

[Sled Puller]

Bob, the deal didn't go through.

Chris, I will factor that into the budget.

 

[HoleshotHolset]

MMMmmmmm... . PROFAB.



Matt

 

[csutton7]

sleddy--good thing... . one must think of aerodynamics just like I did years ago!!!... chris

 

[STRALEY]

Gene, is that a picture of Ed West's truck out in Haisley's shop? Looks a lot alike.



Straley

 

[Jim Fulmer]

Ed West's truck out in Haisley's shop



A Really nice guy Ed is, good to talk to him years ago in Muncie but better to see him out on the track!



Jim

 

[smokinrod]

Its a start, I don't expect it to make the beginning of the season, or maybe not this year at all.



If the original Sled Puller does not get sold, it may be longer than that.

Is it just me or is that a independent front axle,from a chevy ?