Smarty Stack

[boomchadda]

I just bought the Smarty P. O. D. Does anyone know If I can get anything to stack it with? I have the Edge EZ and was wondering if maybe I should use that or maybe there is something better out there that I could use? I have all the air and fuel delivery to support it... ... ... Aftermarket turbo, fuel pump, injectors ect. . Thanks. .

 

[CToney]

With the Smarty POD I believe you can adjust rail pressure. You would not need the EZ then. Rail pressure makes power but it shortens injector life. You can add rail pressure at the dyno to get the BIG #s but in day to day driving injectors should be left with no added pressure. That's just my opinion. Guys use the TST CR along with the Smarty quite often.

 

[SierraRam]

The EZ stacks well with a programmer just keep it on level one, also get the benefit of boost fooling with the EZ.

 

[JJPage]

I found the EZ to deliver a smoother pressure increase than the Smarty.



The Smarty's pressure was eratic according to my RP Gauge, so I just use the EZ on #2 for pressure, works well.

 

[boomchadda]

Thanks guys I will try the EZ box. . My friend recommended the same idea. I have a danin rail pressure gauge so i will try both adjusting the pressure with the smarty and then with the EZ box and see with one works better... thanks again. .

 

[JVolpe]

I have found on mine the EZ rail pressure works better than the rail pressure settings on the Smarty. I use the default RP on the Smarty and use the EZ level 1 for DD and 2 or 3 for the track.