Engine/Transmission (1998.5 - 2002) snow perf. install help

[ETanchak]

i just bought a new snow performance kit and was wondering if anybody has a input on where to mount the pump and reservoir. i have heard some people are using the windshield reservoir so they have a low warning light. there just not alot of room under the hood on a 2nd gen. any help would be nice

thank you enoch

 

[SGrasmick]

I mounted the pump on the bracket that runs from the frame to the bumper in front of the wheel well and I mounted the tank to a hommemade bracket on the passengerside battery... ... . You will probably find thatt he factory tank is way too small and the 8 gallon tank in the bed will be a better decision, I installed my stage 3 on friday and have gone through over 6 gallons of mixture since then and I have not even used the kit all that much. One 1/4 mile pass will nearly drain my tank with the 375 and 625 nozzles

 

[JaMan]

I mounted the pump under the drivers side battery tray on the inner fender well and plumbed in to the ww tank, but I put the bulk head fitting at the top of the tank and ran another tube to the bottom corner of the tank in the lowest point.



Jared

 

[1965LONEWOLF]

How Much Hp Are You Getting With These Meth/water Kits ?

 

[kswieringa]

I am going to put approx 7 gal. tank in front of the passenger side rear wheel under the bed. http://www.plastic-mart.com/class.php?item=493