So you want to build a bumper you say?

[Tcolesanti]

Not trying to hiijack the thread but, where are those Denman Coyotes available from? I tried emailing two of the area reps off of the Denman website and have not gotton anything back yet. I need tires and I really want these.

 

[SS]

Ryan - By no means am I rich or talented and my shop is only 20' x 20'. I've basically learned to weld just by working on this project (autodimming helmet is a must have for beginners!) I had help from a few guys smarter than me, I put a lot of time into it, and I have an understanding wife.



mjoppie - I don't know of an exhaust shop that could roll schedule 40 pipe. I found a shop that specializes in rolling with some very large hydraulic equipment. They showed me some pipe that was rolled at something like a 12" radius that looked pretty good, though I used the preformed elbows on the tight corners. Post your pics when you are done so we can see it too.



Tcolesanti - Try these guys for Denman Coyotes (not shown on their website, but they do sell them):

National Tire & Wheel or

1-800-847-3287 ORDER LINE

 

[Tcolesanti]

Thanks for the info on the tires, much appreiciated.