Here I am

Archived Something bad wrong

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Archived Was hard to start died going to work this am

Archived 06 wont start

Status
Not open for further replies.
OTW to work minutes ago, truck jerked and suddenly running/sounding/ bad.

Read codes with Smarty, I have 4 codes

PO154 Battery Temp Sensor Rationality

PO192 Fuel Pressure Too Low

PO193 Fuel Pressure Too High

PO602 Check Sum Error C

Cleared codes, restarted still the same.

Left truck on the road, borrowed another vehicle to get to work, where I am now.

Help, Please......................Anxiously awaiting any response.

Sorry 05 CTD 186K, auto, 4x4


Been running one of the first 100 Smarty's, with Original Program level 3 for years.
 
Last edited:
no not yet. gonna check my connections and codes if any and see if that does it. if not will have a FCA (fuel control actuator)
and a fuel rail pressure sensor shipped down the rabbit hole to me. it always takes a couple of days for that.
then if no cigar, will try to find someone to haul it 170 miles to a CTD mechanic i can trust. Its an "ADVENTURE"
I always get upset and ugly, when my CTD is sick, its a family member you know.
 
Last edited:
Sled you up and running?

Checked it out today, only 1 code P0193, cleared it and started. Huge effect on power and drivability. Rough idle, rough running, and rattling like “fuel knock”.

Checked codes again P0192 ans P0193 . Cleared codes and ordered a Fuel Control Actuator and a Rail Pressure Sensor. Hopefully Saturday, if parts come in it will be Okay!
 
Status
Not open for further replies.
Back
Top