Archived Sport Headlight Help Please

[holmanrd]

Ok, I have spent hours searching for the answer but to no avail.



I purchased the Sport lights from Importvision and the harnesses from Suvlights (because I was afraid of doing the re-wire). When I got the wireing harness it had the plugs for the bulbs, the pos and the gound wires, and a plug that went into what i assume is the relay, and there it stops.



From there I am completely lost. How do I wire this into my stock wireing system??? Heck I bought the harness because I am electrically challenged and now I have these cool headlights and no wires. Where to I splice into the system to get the switch into the equation??



Please help if you can. Thank You.

Robert

 

[RolandJ]

i have the same system in my truck it should plug into ure existing harness and the into the relays and then a ground and a positive get hooked to the battery let me know it i can help ne more

 

[holmanrd]

RolandJ

Thank you for the fast reply. That's waht i thought as well. On the harness I have the bulb plug, the pos and ground connectiontions and then there is one plug that goes into the relay. Thats all. Nothing coming from the replay and no more wiring coming form the harness. My stock wireing system has no plugs in it to put the harness and the relay in line, just wireing from the switch to the lights. Do I have to splice into it and add connectors? with the one line into the plud into the relay and one plug into the harness where do I put it? Sorry if I seem ignorant, but I truely am. I guess I slept through wireing 101 in shop class.



Thanks again for the help,

Robert

 

[RolandJ]

ure existing headlight plugs should plug into each of the harnesses basiclly make a one bulb headlight into 2 of them and then you do the other headlight

 

[holmanrd]

I guess I am going to have to look at the stock wiring when I get home. With the wiring going straight form the switch to the 9004 and S/M plugs I can't see where on the harness it should plug into.



Thanks for your help,

Robert

 

[RolandJ]

look and the suvlight harness when you get home and let me how many ends u have and if you need help after that let me know .

 

[holmanrd]

RolandJ

Man I feel like a jackass. I sat and thought about it and I think I may have the gist of your directions.



Relay plugs into the harness.

Pos & ground-self explanatory

Side marker from stock wiring goes to side marker plug on new lights

Stock (single) headlight plug goes to Blue (male) plug on harness

New 9004 & 9007 plugs on wiring harness go into new light plugs.



There in, the harness gets the signal from the stock (single) plug and relays it to the two new plugs in the harness. I hope this is correct, if not I will kick myself in the butt.



Thank you for your help and thank you very much for your patience,

Electrically challenged, Robert Holman



P. S. If I ever get out to New Jersey, I owe you a cold one.

 

[RolandJ]

yea you got it the exactly it its a heavy duty harness that splits it into 2 wires so that you can have the sport lights lemme know if you need ne more help