stacking 2006

[TurnerN]

i was wondering whats going to be the best stack for my truck. its a 2006 with a six speed 4x4. I want to try the superchips flashpac tuner, and edge ez. im also installing injectors, fass, and twin turbos. im not really sure what everyone means by pressure boxes and timing boxes, so anyones help would be appreciated. im shooting for 550 to 660 hp range

 

[ENafziger]

With my limited knowledge, I would recommend the TST/Edge EZ stack. It seems like the large majority of people in the 500+ hp range are using the TST. Pressure boxes are boxes that increase rail pressure. Timing/duration boxes are those that advance the timing and increase the duration of the main injection pulse. Care must be taken here not to stack 2 boxes that accomplish the same thing. i. e. don't stack 2 boxes that both increase rail pressure, etc. Hope this helps...



Also, do a search on TST and look at some of dyno numbers people are getting with the mods in their signatures... kindof helps get you an idea of what's needed to achieve a certain horsepower.

 

[Diesel Nut]

TST with twins program

Superchips flashpaq

BD twins

FASS 200gph

100 hp Injectors

Full billet race transmission - you are going to need a serious clutch!

I'm in the 600-650 range. I dynoed 592 before the flashpaq. Its some work, but it sure is fun. Definetly will need a TST. Save for a CP3 pump and dual feed. You'll be up there in no time.

 

[TurnerN]

thats probably the route il go. i really wanted the superchips because of the tire calibration program. those are some awsome power numbers. do you know if there are any better mounts for the tst other than velcro?

 

[Diesel Nut]

If you don't need to constantly see the remote, I mounted mine on the dash on the right side of the steering wheel. The Transmission handle covers it u a little in Park and makes for a nice, clean install. There is a flat spot right there just big enough.



Jason