Suspension:Buckstop & winch

[mparsons]

I just purchased a Buckstop Bumper thanks to the information I found on this website. Now two questions. First, I am thinking of purchasing the M1200 Warn winch. Is it a good choice? Second, what modifications should I make to the front suspension to support the added weight. This website is fantastic. A wealth of information. I spent the last three hours checking out sites. I could not find much in search. Just suggestions about 2 1/2" lift springs.

 

[BarryG]

Some people change the stock front springs with heavier stock springs from the snow plow prep group. I think they are the 47/48 weight combo. I don't believe these raise the front end.

 

[Cummins Pilot]

Skyjacker D25 coils do the trick. 2. 5" of lift but more like 2" with the bumper. Ussually makes the truck sit level since the rear ends are higher than a kite of most stock rigs. I only lost about 3/8" when I put my Buckstop on.



When I get a second winch I'm going to get the Warn 16. 5. But the M12000 is a good one. Any Warn winch is a quality product. But I'd go bigger if you have the chance.