Engine/Transmission (1998.5 - 2002) T-case seal p/n

[SeanM]

Does any one know the p/ns for the t-case seals? I need the input, rear output, and front output. I will not buy them from dodge and prefer not to go with quad 4x4 unless I have to. The truck is a 2002 2500, NV5600, D60, D80, and 241DHD T-case. Thanks

 

[HEMI®Dart]

You should probably get the 8 digit number off of the transfer case tag (5209 8530) to get the correct ones. NAPA has them.

 

[SeanM]

I went to napa with all the info off my truck, the old seals and the tag assembly number from my t-case. The one store tried to tell me I was wrong and had a np231 t-case which was actually used in the dakotas. The other 2 stores carried the seals for the 241DLD but not the ones for the dhd and we for some reason couldn't cross the p/ns from dodge. I am hoping some one on here might have the p/ns for napa.

 

[SeanM]

I ended up getting the seals from quad 4x4 because I can't afford to be without my truck any longer.

 

[SMorneau]

Check out the National 4333N. It is the correct hooded seal for my 96 transfer case. Search it up at rockauto.com for dimensions.

 

[HEMI®Dart]

I must change my previous post

Sean,



NAPA is useless for T-Case seals. Tried to get a NV241DLD output shaft seal. The one listed for the '94 is 1998-2002 NP241DHD Transfer Cases and 1996-1997 NP241DHD with a slip yoke that is approximately 2-3/16" in diameter.



My slip yoke is 1 7/8"



Quad 4X4 is the way to go.