There is no yellow wire (anti-theft switch)

[TFlory]

On pages 36-7 of issue 53 of the TDR is a pictorial on how to install an anti-theft switch on automatic trucks using the clutch jumper. It says that 98 to current truck use a solid yellow wire. I have a 2006 and there isn't a yellow wire in that harness. (there's a yellow/white one). Anyone know which is the proper wire splice into to add the kill switch to for 06 automatics?

 

[Bob4x4]

If your truck has the skim system save your time you don't need it.



Bob

 

[TFlory]

Why? (BTW the wire is DG/YL).

 

[nick05]

i have an 05 and put the switch in. also have the solid yellow wire. not sure on the skim system? where are you looking for the wire?

 

[Bob4x4]

Why? (BTW the wire is DG/YL).

The trucks equipped with the sentry key system(skim) will not run without a programmed key so adding a starter interrupt is not needed. The sentry system can be installed at the dealer level also if it was not built with the system originally.



Bob

 

[TFlory]

The trucks equipped with the sentry key system(skim) will not run without a programmed key so adding a starter interrupt is not needed. The sentry system can be installed at the dealer level also if it was not built with the system originally.



Bob

Cool.

Well, I've got both.