THread size for lug nuts

[Posm]

All 32 of my lug nuts are hard to get on and off. I think the studs are fine, but I need to get some new lugs or run a chaser in my current ones. Does any one know what threads they have?

I have put lubriplate or some other lubricant on my threads at nearly every rotation. The lugs or the studs must be soft! I will go and buy stock lugs if I can not find suitable aftermarket. I bet that will cost an arm and a leg!

 

[strokerschmoker]

Lugs size should be 9/16. I have bought factory lugs before and the price wasnt as bad as I thought it was going to, although I cant remember what I paid for them. Aftermarket lugs I can usually pick up for about a dollar a piece

 

[Posm]

Thanks I thought they looked a little bigger than 1/2 inch. Any idea on thread per inch.

 

[Nate]

I'm pretty sure they are 9/16x18. I got new ones for my truck at Napa, they were around $1 each or so.



I have all my old ones, which are still good, just I can't use them on the wheels I have. It will take me a bit to find them, as I just moved to Idaho. I'd take like $20 for them.