Throttle Linkage

[AWard]

Alrighty well ive got my 12 valve in my 99 F-250. Ive got the pedal out of a gas SD. Ive been runnin it with just a peice of brace wire runnin from the pedal to the lever on the pump and have 2 springs holding the lever back. It sorta runs ok like this but after the truck gets warmed up and ran awhile it gets to bouncing. It will do it a little befor it gets warmed up but mostly after. I dont know why. Just wanted to know if anybody has a part number for all the dodge factory throttle linkage and parts?

 

[AWard]

Just a little more info... I dont have any of the factory linkage on the pump. just the one lever that moves to control the throttle. I need the part that mounts onto the pump towards the front of the motor and then comes back and hooks to the lever...

 

[pwerwagn]

You need the cummins throttle cable and the stock linkage that is on the pump. The round hole in the firewall (behind the black plastic plug) for the throttle cable in the gassers will need to be cut square with a dremel. It hooks to the ford gasser pedal and works like factory parts.

 

[AWard]

Hey Thanks, sounds good, Can i get the linkage and cable at a Dodge Dealer?