Engine/Transmission (1994 - 1998) Timing in Salem/Portland, OR area?

[NHouse]

I have been trying to find time to go up to PDR to have them set my timing, but it is a 6 hour drive and I can't do it on a weekday. Does anyone know of someone that can do it in the Salem/ Portland, OR area? I would like to do it soon, so I can do my next set of mods!



Thanks



Nick

 

[RBrunson]

Nick, I am in the same boat, would like to do mine too. If I find someone in the area I'll give you a holler.

 

[wcjp]

Have you asked Rip? He's local for you.



http://www.protintnw.com/sa-main.htm

 

[Bob V]

I am set up to do it. But it will be a few weeks till I have any free time. Ron, I was working with slotty a few weeks ago, he said hi. NHouse, If you haven't done the dowel pin fix yet I recommend doing the tab method at the same time, makes setting the timing easer with the front cover off.

Bob V

 

[NHouse]

wcjp, I asked Rip when I got a DSS from him, he said he doesn't do much with the 12V's.



Bob V, that would be great, PM me and we can try to figure out a good time.



Nick

 

[BPonci]

I could do it on a saturday at my shop. Its the drive down that $ucks.

 

[RBrunson]

Bob, when ever is a good time for me, I am flexable. Tell Slotty my last day is Dec. 31st and we found our fith wheel that we have been looking all over the state, just four miles from our house..... life is good.

 

[Lucas5477]

I had DFI in Wilsonville do mine. He has a dyno and a full diesel shop. He does a lot of injectors. Im running some of his injectors right now and he set my timming to 17 degrees. His name is Gary Louthan give him a call at 503-999-4401 tell him lucas sent you.



Lucas

 

[BV]

p7100 pump timing

Bob - I sure would like mine checked out also if you have time.



Sorry we couldn't do it around Christmas when the engine was out the front cover off.

 

[EB Diesel]

Check with Dyno-Mite Diesel in Monroe WA they can DO IT!



1-866-774-3966

 

[Woodenhead]

The Power Shop in Enumclaw did mine on a recommendation from PDR. The mechanic that did was a TDR member and I very satisfied with the service and workmanship.



Mike

 

[Bob V]

Well I looked at my calender and I don't have a free weekend till mid July. Hopefully we can figure a time and place we can get together then.

Bob V