Towing Twins Which Chargers/housings

[moremph]

What charger are you using for an economical set of towing twins. Something that boosts quick and good enought to lower egts.



Hx35/3b?



What size housings on each? Wastegated or non



and are you using any type of external wastegate. Thanks for the info Travis

 

[BPonci]

Hx35/14cm and a bht3b26. You can use the 12cm housing and modify it to flow decent. I used a hx35/12 and a bht3b26 and dynoed 560/1360@2300

 

[MCummings]

I'm going to be running a 35/14 and a 3B/22 by next weekend.



I plan for towing, and some in town driving.



I'll keep you updated.



The 35/3B combo is hard to beat...



Merrick

 

[dmistal]

PDR35/14 and bht3b/23. No external wastegate. I'm thinking I'd like to try a PDR modified 12cm2 housing,anybody? Dave

 

[BPINE]

I am running a PDR 35 with a 14 housing and a 3b with a 22. Soon as a recover I am going to try a 40-16 on the top then a 26 on the bottom. Works very good now but for the sake of turning a few wrenches why not try to make it better.

 

[BPonci]

I tried a hx35/12 and it was ok. The dyno numbers were 560/1360 egts were a little high though.

 

[Chipstien]

BPonci, how was the spoolup with that setup? 560 is great considering all the gases are running through that small 12 housing. Seems a really great setup would be a 35/12 and a 3B/26 with a external wastegate off the manifold bypassing the 35. Then you wouldn't be forcing all the exhaust through that little 35.

 

[moremph]

thanks for the info. Keep it coming and give us some updates on your new setup. Thanks Travis

 

[Partyat33]

I am running a PDR HX-35-12 with the wastegate disabled, and BHT3B-22 without a wastegate and an external wastegate. I was only able to hit 1309 degrees at the track this weekend. I have not had to push it towing yet, I got it set to limit the boost to 60 psi.



Dennis