Attention: TDR Forum Junkies QUESTION IS DO I NEED TO WORRY ABOUT THE ANGAL OF THE PINION FOR THE WELD ON BRACES FOR THE REAR END WHEN INSTALLING TRACTION BARS . . OR DO I JUST WELD THEM ON EQUALLY AND INSTALL THE FRONT SECTION AND BUILD THE BARS TO FIT THE SPACE ?
THE PLATES I GOT WAS FROM DYI4X4 WEB SITE THESE WHERE WATER JET CUT AND DRILLED FOR 3/4 INCH BOLTS AND HEIMS THEY WILL FIT A DANA 80 OR AND DANA 70 AND HAVE TOW MOUNTING POINTS UPPER AND LOWER VERY NICE PLATE BEETER THAN WHAT THOUGHT (3/8 INCH PLATES) WOW
WEB SITE ADDRESS:DIY4X: Catering to those who enjoy doing it themselves.
THE PLATES I GOT WAS FROM DYI4X4 WEB SITE THESE WHERE WATER JET CUT AND DRILLED FOR 3/4 INCH BOLTS AND HEIMS THEY WILL FIT A DANA 80 OR AND DANA 70 AND HAVE TOW MOUNTING POINTS UPPER AND LOWER VERY NICE PLATE BEETER THAN WHAT THOUGHT (3/8 INCH PLATES) WOW
WEB SITE ADDRESS:DIY4X: Catering to those who enjoy doing it themselves.
