2nd Gen Non-Engine/Transmission trailing arms?

[dclassens]

Current set up is a 2002 reg cab long bed dodge ram with a leveling kit. the truck has a leveling kit and buck shot tires from previous owner. I am planning on installing a 305 or 315 tire to get rig of the crap buck shot tires. I was wondering if there are aftermarket control arms that re-center tire in the wheel well after the leveling kit and also if there are arms that make some sort of bend or jog to avoid tire rub when turning to full lock. any ideas. .
thanks!
Dave

 

[cerberusiam]

If you are going with a 305 tire you should not need an offset control arm. With the 315 a rim with slitchtly less backspacing will suffice.

I think LazrSmith and other s have offset control arms but most don't use them until you get to a 37" tire.

 

[HHhuntitall]

There are a number of adjustable control arms out there. Most sets are only adjustable on the lowers, with fixed uppers. That can cause a problem with your cast and camber if not adjusted right..... I'd suggest all four adjustable to set it yourself or have a competent shop do it. Ebay might be a good place to start looking, as well as some 4x4/Offroad rags, such as 4 Wheel and Offroad. Lots of guys making them out there. I've used these guys for parts, they seem pretty good for parts to build your own... ... . http://ballisticfabrication.com/DOM-Tubing-by-the-foot_c_18.html