Transfer Case Shifter

[BManier]

Ok guys I have a good one for you. I have an NV5600 bolted to an NP205 with an advanced adapter kit. But does any one have suggestions on how to do the transfer case shifter? I was wanting twin stick but I was wondering what you guys had to say. and the T-Case is back a little farther in the truck.

 

[DVolk]

you dont mention what the truck is in if its gm or ford or what ?



I would contact HD gear or Offroad Unlimited



or Offroad Design - Fullsize 4x4 Performance



there is some twin stick setups made to fit some rigs how ever for a gm or dodge with a nv4500 or a nv5600 with the passenger drop setup i dont see any but there the wizzards i want a setup for my 92 as well

 

[therabbittree]

there is twin stick kit for the chevys with pass side drop. . I've got one. . haven't put it in yet. . one member here is using one with his firstgen . .

heres the link... Home

you may need to modify the kit slightly. . etc

Thanks

Deo

 

[BManier]

sorry guys I did not say what the T-Case was. It is the original out of the 78' Ford I am converting. So driver drop, behind an 04' NV5600. I used an adapter from advanced adapters for the fit if it makes a difference. I guess the problem I am seeing with using a normal kit for the 78 F250 is where am I going to attach it on the NV5600.

 

[therabbittree]

That may even be easier. . as the driver side drop is more common. . did you check the site I linked to?. . or do a twin stick 205 search on google. . etc. .

Thanks,

Deo

 

[HSkinner]

I have the divorced np 205 behind the roadranger. Can they still make linkage for this or is it to far back? It was previously set up with air cylinders but I wouldn't mind get rid of this and making less complicated.

 

[therabbittree]

one of the companies i think northwest fab makes custom cable shifters etc...

Cehck them out.

Thanks

Deo