Here I am

Trucks! Powerwagon.

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Engineer's Alert on the use of Exhaust Brakes

Engines, Parts and Accessories...

Just finnished watching Trucks on TNN. They said the concept powerwagon had a 7. 3diesel in it. Please someone tell me it ain't a powerchoke!

------------------
95 Dodge 2500 Luverne grill guard,headache rack,running boards and Amzoiled. Soon to be mildly bombed. 84 Dodge d-150, 318 Hooker headers,Edelbrok intake,mallory ignition,Carter Afb,Accel coil,and Custom dual exhaust. Boat,fifthwheel,motorcycles,and shop. 72000 as of 3/1/01,not even broke in yet. Old Dodge 126000 miles and running better than new.
 
<font color=blue>Last PowerWagon Concept I have seen had a CAT in it. Ii has a 3126 in it. Specs on 3126B Engine 7. 2L 175 to 330 hp.

#ad


This the one you saw?<font size=-2>


[This message has been edited by KatDiesel (Eric Howard) (edited 03-04-2001). ]
 
Thanks,glad it ain't a powerchoke. I liked the old ones better to. Maybe with a B-series?

------------------
95 Dodge 2500 Luverne grill guard,headache rack,running boards and Amzoiled. Soon to be mildly bombed. 84 Dodge d-150, 318 Hooker headers,Edelbrok intake,mallory ignition,Carter Afb,Accel coil,and Custom dual exhaust. Boat,fifthwheel,motorcycles,and shop. 72000 as of 3/1/01,not even broke in yet. Old Dodge 126000 miles and running better than new.
 
You know what, that thing would be bad as I am a raving dodge power wagon nut, but look at the specs for the axles. Dana 44 front, 8&3/4" rear give me a break. You can see where all of the money got funneled on that project. Bomb that thing and you'll have to put $6500 in axles in it. Ah well, still looks cool!
 
I saw the show yesterday as well. Truck is a little "strange looking" but was pretty awsome!

They said the torque was 700+ lbs, forgot what they said the HP was but it was up there as well.

Stan
 
If it's the same one i saw at last years auto expo it was a cat motor running on a new synthetic diesel fuel. I CALL SHOTGUN!!!!
 
the warranty guys (i hope) will insist on more serious axles if that thing goes to production. the 44 may have a very short life carrying that big ol' CAT, and the rear will twist an axleshaft in two transferring the torque in a high-resistance situation. aside from that, bring it on!
 
The axles they showed on Trucks! had triangular grid supports all the way across underneath them,looked very heavy duty.
 
Hey, I have one of those and so does my son. One of the two big differences is the ones we have are crew cabs ! The other is the manufacture is ..... Matchbox #ad



------------------
96 2500 4X4, SC,SLT, 12 valve,lost kitty 5SP 3. 54. line-x liner All stock
 
If it doesn't come with the Cummins, they should change the name to Powder Puff Wagon #ad


------------------
2001 HO 6 speed Regular Cab SLT 4x4 3. 54 anti spin 2500. Used for the daily grind and sneaking away to some secret Baja beaches toting a cabover
 
How 'bout a four door version??????????????

Hmmmmmmm. fouur dooors mmmmmmmmm
#ad


------------------
Y2K+1 <font color=white>3500 4X4 Quad Cab</font> Powerpacked , Jakit's Front End Leveling Kit with 255/85R16 BFG M/T's Custom Rhino Liner (as seen on website under tool man's truck feature) DeeZee Goodies, Hadley air systems 150 psi comp and air storage.
Keeping the rubber side down 'n' shiny side up Will Bring a smile at the end of each day (hopefully) See Her Here

#ad



.



[This message has been edited by ToolManTimTaylor1 (edited 03-17-2001). ]
 
Thank goodness that power wagon is just a concept. That is one ugly vehicle!

------------------
93 D350 LE CC, Auto, 65,000 miles, Stock, 94 11Z Elkhorn Camper
 
Back
Top