Engine/Transmission (1998.5 - 2002) turbo alarm setting? on the BD X moniter for

[Diesel Dork]

I'm embarrassed to ask this question but here goes. I have a 99 Dodge 2500 with the X monitor from BD. I've made quite a few mods listed below and I need to know what setting to use for the adjustable turbo alarm.



Here's all the new mods;

S&B cold air intake and filter

S&B intake elbow

FASS High performance fuel pump 95 GPH

Customized bored out banjos ~Thanks Pete

ISS pro EV2 fuel pressure gauge - electronic

Mag-Hytec double deep transmission pan

Superchips Flashpaq Tuner -performance setting

BD Cool Down Timer kit

Michelin Tires LT245/75R16E1



truck came with;

BD X moniter for Transmission temp, Pyrometer temp

and Turbo boost with adjustable alarm.

Stock Turbo

 

[ALepley]

Are you asking what your limit for boost should be set at or are you asking what the egt alarm should be set at? I have a different chip/programmer. I have the edge with attitude monitor. I have my boost set at 36 psi which defuels if it goes over its limit. I have my egt's set at 1200 degrees to defuel if it goes over. Dont know if that answers your question but hope it helps.