Archived Turbo Boost Code

[lcaad1249]

Help, After getting my oil changed today, I return home to put back my Juice Attitude. I go on a stroll to make sure everything's running right. On my return trip, Boom. Truck loses all power and wouldn't go above around 2000 RPM's, and boost wouldn't go above 4 PSI. I go home, remove the chip. Same thing, no changes. Unhook the batteries for 15 minutes 2 different times. Even tried starting and stopping the truck 30 times. No luck!

 

[lcaad1249]

Also threw P0236 and P0016 Code

 

[Boondocker]

A bad MAP sensor connection will cause those problems. Double-check your MAP connection, clean and reseat the harness. Do you have a Check Engine Light on? If so, you're in limp mode. After 4 normal engine warm cycles, the CEL should cancel and you'll be out of limp mode. Or you can connect a code scanner, read and clear the codes.

 

[ChrisM]

I had the same problem same code ,I replaced the map sensor ,no more codes and seems to be running better than ever.

 

[BKeence]

Sounds like you blew a boot off the inner cooler.



Brian