Turbo Oil Drain Hose

[Jeff_K]

Does anyone know where to get some hose similar to the 7/8" ID stuff used on the turbo oil drain? I need some longer pieces and cummins just sells the short 4" piece for $30. I have found 7/8" hydraulic hose, but it is way to thick and practically un-bendable. Any help would be appreciated!

 

[CCBrady]

Jeff have you tried a tubing shop? Most of these shops have or can get just about anything you can think of.

Chris

 

[Jeff_K]

Yeah, I have tried every place I know of in town and done a lot of searching on the internet with no luck. I am sure someone knows where to get it, especially the guys who have made their own twins.

 

[JStieger]

Yeah, I have tried every place I know of in town and done a lot of searching on the internet with no luck. I am sure someone knows where to get it, especially the guys who have made their own twins.

Jeff-



This place is in Salt Lake City, but they have tons of hose. I picked up a 3' stick of 3" 4-ply silicone hose a while back from them.



www.houseofhose.com

 

[Jeff_K]

Thanks Julius, I will check them out!