Engine/Transmission (1994 - 1998) Turbo Recomendations?

[JeppinHackSaw]

Planning on 370's (or comparable) Delivery vavles, 3k GSK and a 0 plate. Already have 4 to 5" exhaust. Trans will be beefed by the time everything goes in, timing will be stepped up as So, please take this all into consideration.



The cheaper (yea right!) the better. Looking for something exonomical and easy to install (dont want to do a lot of fab work) and something reliable.

 

[CSchafer]

Call up your favorite turbo shop and run it by them. I'll recomend sps64-14 or quick diesel 64, depending on who wins the coin toss.

 

[San Felipe Bob]

Cheap?

I like my 35/40 hybred.

It was about 600. 00 2 years ago. (I already had the 14 cm wastegated housing. )

Very Simple bolt on.

I can get the EGT's up there if I keep my foot in it.

My next step will probably be towing twins.

Our 12 valve motors have a very narrow power band compared to the 24' s and the CR's.

Be sure the turbo people you talk to understand you have a 12 valve.

It's all about the combo and what you are going to do with it.

Have fun



SFB

 

[Forrest Nearing]

my powerband is 1700rpm to 4000rpm. not bad IMO

 

[bmoeller]

With the fuel I have, the 64/14 spools as good, or better than a PDR HX-40. Haven't hooked a trailer to see what the EGTs will really do yet.