Attention: TDR Forum Junkies 
U-joints and Center Carrier
Hello all, well I've been searching thru the archives trying to find part numbers for the three rear dr. shaft u-joints and the driveshaft carrier.
So far I've come up with :
rear u-joints ; Brute Force #2-0054BF this is apparently a NEAPCO bearing and is non-greasable.
I also stumbled upon two different carrier bearing #'s
they are # 210391-1x and 211848-1x ; both are spicer.
My question is are there any other replacement joints out there and what are the Brand/part #'s
also which of the above carriers is the correct spicer #?
I know this may be a trivial question but my local Napa store just went under new management and no longer carries spicer or neapco, so I am going to call a local spicer dealer my Uncle deals with,who tells me I need to have specific spicer part #'s as this dealer usually only deals with the BIG RIG guys (80,000 GVWR)
Hello all, well I've been searching thru the archives trying to find part numbers for the three rear dr. shaft u-joints and the driveshaft carrier.
So far I've come up with :
rear u-joints ; Brute Force #2-0054BF this is apparently a NEAPCO bearing and is non-greasable.
I also stumbled upon two different carrier bearing #'s
they are # 210391-1x and 211848-1x ; both are spicer.
My question is are there any other replacement joints out there and what are the Brand/part #'s
also which of the above carriers is the correct spicer #?
I know this may be a trivial question but my local Napa store just went under new management and no longer carries spicer or neapco, so I am going to call a local spicer dealer my Uncle deals with,who tells me I need to have specific spicer part #'s as this dealer usually only deals with the BIG RIG guys (80,000 GVWR)
Last edited:
