Have the goodies. The DTT stuff really made a difference but out here in the fronteer with 75 mph speed limits and trying to get my CTD to almost run and pull as good as my 97 stock PSD has been expensive. But the last trip w/ 5th returning from Tulsa @ 75 mph, egt 1200, boost was a maintained 24 - 30#, OD lockup and a good head wind my would not hold speed and I was forced to drive in 3rd. I could shift into OD but could not hold speed. So It was 3rd lockup at 3k rpm, egt could exceed 1300 on any slight hill for the next 160 mi. and 6 mpg. 5 min cooldown and shutdown for 1/2 hr and it was ok again. Today I ordered a GV OD, I hope that running at approx 2450 rpm, @ 75 in 3rd will take some load off the engine and transmission and will be in a better rpm range for pulling grades: at 2k rpm in OD it doesn't cut it where as 2200rpm @ 85+ is easy but frowned upon by the police and maxing out egt.
With the OD unit I will still retain my 2k rpm in OD when pulling my car hauler and double OD for M T high speed economy runs @ approx 1550 rpm, @ 75 mph.
------------------
2K, 2500, Quad, 4x4, 3:54LSD, A/T, reese 15k 5th slider, EASLEY BULL BAR, WESTIN NERFS, TA's, 9000's, stealth DD2's, DD Boost & elbow, ISSPRO pyro & boost, Turbo Lifesaver, JARDINE 4", DTT VB,TC,TC SAVER and AUX COOLER, PAC BRAKE, MAG HYTECH TP& DC, onboard.
pullee #1 26' Arctic Fox 5th
#2 22' car hauler w/ 76 Pinto 392cid or 68 Cyclone GT Cobra Jet FB
NRA-LIFE, VFW-LIFE, SoCSA-LIFE, SASS
[This message has been edited by JNutter (edited 02-15-2001). ]