Here I am

Archived vp44 fuel pin

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Archived Wpnt start= Lift pump -- tank sender 12v

Archived won't start - cold weather

Status
Not open for further replies.
i am a new member hello to all. i have a 1st gen in which i have changed out my pump and added the bd fuel pin and 3200 rpm gov spring. it has been running well, but now that its getting cold the truck smokes for the first 5 minutes after it is started heavy white smoke is this suppose to happen. 1990 dodge d350 also starting to run rough only when cold
 
Last edited:
Well, you certainly don't have a VP44 (1998. 5-2002).

Check your intake heater (fuses and relays) for operation.

Might be that your timing is a little off as well.
 
sorry i was typing to fast ve pump we had it rebuilt. thanks i will go down and get it timed the fuses seemed to be working fine. .
 
Status
Not open for further replies.
Back
Top