Waco Dyno Day

[Deezul1]

Dyno Day is all set to go here in Waco. They have a Dyno Jet dyno and will give horsepower and torque readings and a printout of your runs. The pricing is 3 pulls for $50. 00 if we can bring at least 15 trucks. If we can get quite a few more we may be able to get a better price. All are welcome to join us so bring them Chevys and Fords along. This should take place the first or second weekend in August.

The Dyno is at DC Motorsports at 3000 Franklin in Waco.

Dyno Day will start at 9am Saturday morning August 14th



Dyno Day on the 14th is cancelled and moved to the 21st



Who is coming?



They said their dyno wont have any problems with our Diesels as it will do 1200hp ok.

Hey Jim Fulmer, come on down for a visit and give these guys a new record for their dyno.

 

[Jim Fulmer]

Sounds like fun to me, give me a date and I'll see if it will work with the schedule as I'm on the road right now.



You might try and get a hold of TXdieselkid and see if we can get the Powerstroke guys in there, that will also help the count!



Jim

 

[Jeff Clark]

What's the location?

 

[Deezul1]

Jim

It would be great to have you come down, which of those weekends works best for you?



The Dyno is at DC Motorsports at 3000 Franklin in Waco.

 

[Jim Fulmer]

which of those weekends works best for you?



John, the weekend of Aug 14th and 15th works best for me looking at the schedule today, that will give me time to get home and ask for that weekend off.



Jim

 

[Deezul1]

Ok folks, if August 14th works for most of you lets shoot for that. I gotta see Jims truck rack up those big numbers.

 

[JBHale]

Sounds good , Count me in.

 

[TxDieselKid]

I posted it over there for them Ford guys, they should help boost the numbers in attendence a little!!

 

[Deezul1]

TxDieselKid

Thanks

 

[Deezul1]

The Dyno Day will be at DC Motorsports at 3000 Franklin Ave in Waco. It will be on Saturday August 14 time to be announced but prolly it will start at 8am, more on that later after I confirm with the shop. I will post directions later also once I figure it out. I can get there but dont know all the street names.



Duallies shouldnt have to remove the training wheels.

 

[Jim Fulmer]

Link



Here you go!



Jim

 

[Deezul1]

TTT

 

[Jim Fulmer]

John, I'll post back here when I get the days off as I just got back in town... ... . shows to be a free weekend!



Jim

 

[Deezul1]

Sounds good Jim, hope it all works ok.

John

 

[TractorNut]

I'll be there... I got to get that wire attached to the pump better. . I keep losing the connection... . No wire. . no power... .

Bryan

 

[Texas Diesel]

Can I run both trucks for $50 (once each)?

 

[Jeff Clark]

How's the turnout lookin? I'm thinking of going down that day. I might run if I can fit on the rollers, but I don't want to pull tires in the parking lot. They're too stinkin' heavy.

 

[Deezul1]

Tejas Deezul

I bet you cant run both for the price of one as the tie down procedure and sensor setup takes time that another truck would pay for, but it cant hurt to ask them.



There are no obstructions to the sides of the rollers to limit width, the rollers stick up out of the floor maybe 6" with nothing on either side.



Go here for more about who is coming, it looks like we will have enough to make the 15 anyway.



http://www.dieseltruckresource.com/dev/showthread.php?s=&postid=462831#post462831





anybody thats planning on coming please let us know if you can.

 

[Jim Fulmer]

I'm at a 50/50 shot right now, someone has to go to Florida to fly a Jet, if he can't make it then I'm going to have to go!



Jim

 

[Deezul1]

Everybody is welcome to join us, even if it isnt a Dodge or a Diesel. New folks come on out and see how much fun we are having you are welcome.