Waco

[JKouzez]

So Guys when can we get another Waco tune and BS day going we are about due for one. I would really like for someone to help me fix my KDP and im sure there are some other oddball projects that people would like to do.

 

[TractorNut]

Let me know. I"m game. . I'll be home most weekends until mid Dec... but I cann't even get to my shop... I got stuck about 15ft off the road trying to get to the shop a few weeks ago... No chance now. . (where's that concrete. . or at least gravel. . )

Bryan

 

[Deezul1]

How about the weekend after thanksgiving weekend?

 

[TractorNut]

That weekend works good for me. . (I'll be out of town the weekend after. . ) If we can get TO my shop. . it will be open for tinkering... I have power now... but no Heat. . hahaa. . Drop JB a PM and wake him up... .

Bryan

 

[JKouzez]

weekend after thanksgiving sounds great if possible i would really like to do my KDP only if feesable of course.

 

[MMcAnulty]

I used to live around Waco and am about an hour from it know. I would'nt mind stopping by if that is alright with yall, where do yall meet up at?

 

[TractorNut]

OK, Deezul. . which date... I was looking at 12/4-5... if you were thinking of another let me know...

JK, do you have your new front seal??? (drop JB an email to let him know. . ) if we don't get much more rain we MIGHT be able to make it to my shop. . if not. . I'll see if I can find back up location...

MMcAnulty... We have been meeting in the parking lot between the Elite, and Rudy's. . and we go from there... (Usually Sunday between 11-12. )

Bryan

 

[Deezul1]

Lets try Dec 5th Sunday at 11am. Rudys is at I-35 and Valley Mills on the east side of I-35 behind the Elite Grill which you can easily see from the intersection. Does that work for you guys?

 

[TractorNut]

Good for me... I'll be my usual 11:15... We'll have to see how the weather does for the next few days to see if we can make it to the shop... (I'll get a driveways one of these days...

Bryan

 

[EGaskamp]

Count me in! I'm game. I told my brother about it and he and another one of my friends plan to come. I also was wondering if anyone knew how to hook up a fuel press gauge. I'd really like to get that done. See yall there!



Eric

 

[JBHale]

See ya there, bryan you got my phone # ,JK did you get the seal or do I need to bring one?

 

[TractorNut]

If this weather holds up, it should be no problem getting to the shop... I'll have room for 2. . maybe 3 inside...

Bryan

 

[TractorNut]

Shop is ready... but the weather is not looking too good... but maybe it will miss us... See you guys in the morning...

Bryan

 

[TractorNut]

Great to have everyone out today... Maybe next time we'll be able to get more than 3ft into the shop. . (JK needs a 4x4... or I need some concrete... haha. . )

As usual, JB thanks for all the work... hang in there. . It'll all come full tilt... .

Thanks guys. .

Bryan

 

[Deezul1]

Thanks for the use of the shop Bryan, its great to have such a place to work on trucks.

Its good to see all ya'all again, too bad the folks on the freeway couldnt see us (especially after JB went by) maybe thats why the cops didnt get us, they couldnt see us.

A fun day, the rest of you missed out, maybe next time.